Direct Drive and Belt Drive Centrifugal Roof Exhausters are designed for roof mounted installations in low to medium pressure applications. Domex Fans are ideal for general purpose exhaust applications including: bathrooms, garages, general kitchen areas, offices, churches, dormitories, factories, large warehouses and other relatively clean air applications

Direct and Belt Drive Centrifugal Upblast Roof Exhausters are designed for medium to high pressure applications. They can be either roof or wall mounted. While suitable for general ventilation, Fumex fans are specially designed to discharge contaminated or grease-laden air or heat/smoke up and away from building surfaces. The optional Fatrap restaurant grease exhaust configuration makes Fumex fans particularly suited for all food service applications and chemical fume hoods. Additionally, the heat & smoke configuration is used in case of emergencies or high-temperature exhaust applications.

Low Contour Centrifugal Roof Exhausters. LC Dynafan units are completely self contained packaged exhaust systems. Direct drive units are effective at providing a quiet steady exhaust at moderate resistance. Belt driven LC Dynafans offer a wide range of sizes. Units are low and inconspicuous, with a unique design that features motor mounting beside the wheel rather than atop the wheel.

The versatile Linea centrifugal roof exhauster, offers a wide use in types of industrial, commercial and public building applications, and answer the need for an efficient roof exhauster contained in an aesthetically correct housing. Linea exhausters are used on school buildings, churches, hospitals, apartments, motels, shopping centers, factories and commercial buildings as well as all types of government facilities and in every climate condition.

Direct Drive and Belt Drive centrifugal fans are designed for roof mounted installations where a lockable, vandal resistant unit is required in low to medium pressure applications. LVQ Dynafans are ideal for general purpose applications including: bathrooms, garages, general kitchen areas, offices, churches, dormitories, factories, large warehouses and other relatively clean air applications.

Zephyr | Z

Ceiling and Inline centrifugal fans are designed and constructed to create a quiet and reliable product. Extensive combinations of wheel sizes and speeds enable the Zephyr to cover a wide range of CFM. All Zephyrs feature acoustically insulated housings, custom designed blower and motor pairings, motor mounted on vibration isolators, and for all but the smallest Z3H, duel inlet blowers.

Single and Twin unit belt drive centrifugal Cabinet fans are general purpose duct blowers. These versatile, quiet operating air movers provide economical, convenient and effective ventilation in ducted systems. They are also used extensively in heating and cooling systems. ZC units are sized with space saving in mind and furnished with inlet and outlet connecting flanges and side access panels as standard.

Make-up Filtered Fresh Air Supply centrifugal fans for commercial and industrial use. PennBarry's Muffan replaces foul or contaminated air that is removed by a building's exhaust system. Such make-up air is so essential that it is part of safety and building code requirements for commercial kitchens, chemical laboratories, electical control rooms and where gas equipment is installed. Proper make-up air provisions should be part of every building plan.

Filtered Supply, belt drive, side intake centrifugal fans are designed for roof mounted installations in low to medium pressure applications. FS Muffans are ideally suited to provide filtered fresh air for kitchen areas to meet applicable NFPA96 code, as well as general applications such as auditoriums, offices, churches, dormitories, and factories.

Centrex Inliner | SX

Direct Drive and Belt Drive Centrifugal Inline Fans are widely used in square ducts as clean air boosters in both supply and exhaust systems where the installation of convetional blowers is impractical. Their compact design gives designers an excellent alternative to conventional blowers. Centrex Inliner fans can be installed either horizontally, vertically or at any angle determined by the duct work. Full size removable panels enable easy access to the fan interior.

Direct Drive Centrifugal Inline Fans designed for moderate ventilation requirements. All REX Jr. fans are powered by an external rotor motorized impeller. This design provides excellent heat dissipation even at low rpm. All of the REX Jr. Series fans are speed controllable. Featuring airfoil backward curve impeller, self-lubricating/sealed for life precision ball bearings and automatic reset thermal overload protection. Constructed of galvanized steel housing with electrostatically applied polyester/epoxy urethane powder coat finish.

Round Centrex | REX

Tubular Model REX Direct Drive and Belt Drive Centrifugal Inline Fans. Efficient aluminum, backwardly inclined wheels and aerodynamic straightening vanes give the Centrex a quiet efficiency unmatched by competitive models.